Goring Kerr manufactures various types of metal detectors and metal detector systems. The most common configuration, the belt conveyor system, is found in many applications. However, the installation requirements apply to all of the systems Goring Kerr manufactures. Contact Goring Kerr for more information on your application.

Model 402 Gravity Feed System

The model 402 system is supplied completely assembled and tested from the factory. The system you have may vary from that shown here. Four mounting holes are located at the top of the frame to support this system. The typical mounting method is to suspend the system with threaded rod. The threaded rod should support the complete load of the system. When securing the threaded rod to the 402 frame isolation bushings should be used on all four mounting holes. This will electrically isolate the frame from any support structure. The 402 system is not designed to support piping from any of the ports. Piping connected to any of the ports should be independently supported. Hanging piping from the reject value may distort the valve body and cause unreliable rejection.

Model 426 Pipeline System

The model 426 pipeline system is supplied completely assembled and tested from the factory. Four mounting holes are located in the corners of the support frame. The typical mounting method is to suspend the system with threaded rod. The threaded rod should support the complete load of the system. When securing the threaded rod to the 426 frame isolation bushings should be used on all four mounting holes. This will electrically isolate the frame from any support structure. Any pipes connected to the system should be independently supported and not supported by the metal detector system.

Model T7 Pharmaceutical System

The model T7 pharmaceutical system is supplied completely assembled and tested from the factory. The system is ready to use right from the crate. The reject device, control unit and search head are pre-wired. The mains supply power cord is also pr-ewired.